With the widespread use of belt conveyors, in the process of long-term use, some customers think that the service life is short, so how should we improve the service life of belt conveyors?
1. Add scraping device to the reversing roller: we can install a scraping device at the redirecting roller along the conveyor belt, which can reduce the problem of material sticking at the reversing roller, thus solving the problem of sticky material caused by rolling. The conveyor belt is partially damaged;
2. The head, tail and intermediate transfer transition of the belt conveyor can be selected for improvement: these places have a great influence on the service life of the conveyor belt, so we need to carry out transitional injection to reduce the wear of the conveyor belt as much as possible. , to ensure the phenomenon of the folding of the conveyor belt and the appearance of the middle bulge.
3. Improve the feeding hopper of the conveyor belt: It is an effective measure to improve the feeding hopper type of the conveyor belt to prevent the early damage of the conveyor belt.
4. The local damage repair of the conveyor belt can also prolong the service life of the belt conveyor
(1) Local cold drawing
(2) Local hot vulcanization
(3) Local cold sticking
All three methods can perform local repair on the conveyor belt.
5. Choose a reasonable type of belt and maintenance: Choose a reasonable type of belt conveyor, we can strengthen the maintenance in winter by adjusting the deviation correction device along the line according to seasonal changes, so as to prolong the service life of the belt conveyor.
6. Adjustment of the direction of the material flow: The direction of the material flow also has a very important impact on the service life of the conveyor belt. We should make the material flow and the conveyor belt run in the same direction, which can greatly improve the belt conveyor. service life.
