How to Repair a Food Conveyor Belt

Is there any way to fix the food conveyor belt? The following is the introduction made by the manufacturer of the food transport machine for you. I hope our introduction can be helpful to you.
1. Side length repair technology: For a side length with a large side length, the side length repair is realized through side length repair. The main purpose is to make the food conveyor belt work better and avoid damage to the edge of the belt.
Construction points: L-shaped polyurethane patches with a thickness of 18 mm and a width of 10 mm or polyurethane square patches with a thickness of 15 mm and a width of 30 mm are firmly bonded to both sides and the bottom of the edge of the food conveyor belt, and the edge of the irregular food conveyor belt is filled Polyurethane V218 belt repair adhesive with flow filling properties. Turn it into something solid and bouncy.
The characteristics of the project are: converting the upper, middle and lower layers of corners into full-thickness corners, converting the rubber corners with poor wear and impact performance into PU corners with high wear resistance, and comparing them with general PU corners . Impact resistance
2. Hemming method: For the second type of damage, the degree of damage is not large, and it can be repaired by hemming method. The purpose is to avoid the further deterioration of edge damage. Operation essentials: Use a 2.5 mm thick and 10 mm wide polyurethane repair adhesive strip to wrap the fracture of the adhesive strip. The advantages are: the upper and lower adhesives of the edge are integrated with the inner adhesive to obtain a strong protective film, which can effectively resist the impact and damage of the edge; the wear of the bottom surface is significantly improved, and the A layer of M-type anti-wear material is added to the bottom surface to protect the bottom surface.