Talking about how the conveyor belt industry will respond to market development in the future

The working resistance between the conveyor belt manufacturer and the idler roller-affects the production efficiency of the enterprise, and solves the problem of reducing the resistance between the idler and the conveyor belt, and the production efficiency is also improved to a certain extent. The rollers of Hehe are beneficial to reduce the working resistance of the conveyor. Narrowing the distance between the rollers can reduce the simulated friction coefficient, but the total resistance will increase. Except for the protective tape at the unloading point, do not increase the roller in the general bearing section. Density. The two sets of rollers are separated by 1.5m, and they support the conveyor belt well, so that the sag of the conveyor belt does not exceed the limit value to reduce resistance; the tape core rubber and surface rubber use new flame-retardant materials, which have excellent grooveability and Reduce the pressure resistance of the belt. In order to calculate the running resistance of the belt more accurately. On the contrary, foreign countries usually adopt the increase of the idler spacing to reduce the total value of the resistance, but the design and installation must be based on sufficient dynamic analysis and the idler. Ensure the reliable operation of the belt conveyor.