The upper and lower sides of the conveyor belt affect each other and are independent of each other.
In general, the parallelism of the lower idler and the insufficient levelness of the rollers will cause the lower side of the conveyor belt to deviate. The lower side is deviated while the upper side is normal. This situation is basically caused by the poor cleaning device, the material sticking to the lower idler, the non-parallel rollers of the counterweight, or the deflection of the counterweight bracket and the non-parallel lower rollers. , the specific situation should be adjusted according to the actual situation.
Generally speaking, the deviation of the lower side can be corrected. It can be corrected by improving the working condition of the cleaning device, removing the material stuck on the roller and the idler, adjusting the lower flat idler, the lower V-shaped idler, or installing the lower idler. Side self-aligning idler to achieve the purpose of correcting deviation.
