After long-term use, the conveyor belt will be more or less damaged. This question should also cause headaches for many people. What to do when the belt of the conveyor is damaged?
First, the conveyor belt deviates during operation, causing damage:
1. The blanking position on the conveyor belt is wrong.
2. Inappropriate tensioning of the conveyor belt.
3. Conveyor belts with irregular seams.
Secondly, the conveyor belt breaks:
1. Foreign matter is mixed in the conveyed material, and the foreign matter is hard and angular.
2. The conveyor belt is not strong at the connection.
3. The idler bracket causes scratches to the conveyor belt, and in the case of the conveyor's idler defect
In addition, the conveyor belt appears to be cracked:
1. The conveyor belt has many bending times, which is limited by the size of the space to a certain extent.
2. Under the action of heat flow, the joint will generate more than two heat flows due to various reasons.
3. The use environment of the conveyor is not suitable.
When the above phenomenon occurs, the operator should immediately stop the operation of the equipment, analyze and check the cause. If it is caused by the transportation environment, you should first understand the transportation environment, and choose the appropriate transportation method according to the characteristics of the conveyor belt; if it is caused by the transportation environment, the equipment should be adjusted and debugged; if it is caused by the conveyor belt process, it should be conveyed If the repair cannot be serious, the conveyor belt should be replaced with a new one to avoid further damage and cause greater economic losses to the enterprise.
