1. The raw materials of the conveyor belt in the timber industry are divided into: PVC and rubber; PVC is a light conveyor belt, while the rubber material is attributed to a heavy conveyor belt. It is also commonly used in coal, ore and other occupations, and the price is more expensive than PVC.
2. In the wood industry conveyor belt, PVC material conveyor belts have special requirements to customize markings and add friction. The wood professional conveyor belts will have customized markings on the surface to prevent the wood from moving and the belts are not moving. The commonly used markings are diamonds. Checked markings (marbled) and in-line markings. The flat-shaped sand-thick wood plank has good quality and high friction, but on the thinner sand wood, the gypsum board will leave a slight sand mark. The diamond grid does not have these problems, but the frictional force is almost worse than the one-shaped grid. The thickness of these two kinds is 9MM. There are grass patterns, golf patterns, and the thickness is 5MM and 7MM.
3. there is another kind of conveyor belt for woodworking industry is sander belt. The belt of the sanding machine is actually the belt of the sanding machine, the PVC conveyor belt or the rubber conveyor belt, and it is still a seamless circular conveyor belt. It is placed on the sanding machine when the wood industry is processing wood. In the process of sanding and other wood processing, the wood must move with the belt. If the friction is not enough, the conveyor belt will move forward by itself, but the wood will not move, and the intention of sanding the wood will not be lifted. Secondly, the hardness of the wood-specific conveyor belt should be appropriate. If it is too hard, it will be difficult to load the belt into the sander, and the softer will affect the service life.
