The Specification Parameters Of The Rubber Conveyor Belt

The old specifications of ordinary conveyor belts are expressed by the width (mm), the number of skeleton layers, the thickness of the upper and lower covering rubber (mm) and the length (m). For example: 600*5*4*3.5*150 means a conveyor belt with a width of 600mm, 5 layers of tape, a thickness of 4mm for the upper cover, a thickness of 3.5mm for the lower cover, and a length of 150m. 500mm*5P(3+2.5)*100 is commonly used in general production. The new specification of the ordinary conveyor belt is the longitudinal full thickness tensile strength (kN/mm), the letter G for general purpose, the belt width (mm), and the code of the performance level of the covering layer (L for light, H for heavy, M It is a common type), and the thickness of the upper and lower cover rubber (mm). If it is an endless belt, it also includes the inner circumference of the belt (m). In addition, if necessary, there is also the content of the core material and the number of layers. For example, a conveyor belt with a specification of 600GB900L4/2-50 (NN3) indicates a longitudinal full-thickness tensile strength of 600kN/mm, general purpose, belt width 900mm, covering layer performance level is light, and upper and lower covering rubber thicknesses are 4mm respectively And 2mm. The belt is ring-shaped, with an inner circumference of 50m, the belt core is made of nylon, and 3 layers of fabric.