Post-cleaning maintenance methods:
1. Environmental control: After cleaning, store in a dry, ventilated place, avoiding direct sunlight or contact with acidic, alkaline, or oily substances. The recommended temperature is between -15℃ and 40℃.
2. Regular inspection: Check the timing belt tension and wear monthly. Replace immediately if cracks, tooth wear, or cracked adhesive are found.
3. Lubrication maintenance: Use a special lubricant (such as a silicone-based lubricant) to reduce friction, but avoid oil contamination of the belt surface.
4. Load management: Avoid overload or impact loads. Start the belt under no-load conditions.
Key to extending lifespan:
1. Storage method: Store in rolls, do not fold, and turn over quarterly to prevent deformation.
2. Installation specifications: Ensure the pulley tooth count matches, and adjust the tension according to the equipment manual (e.g., a sinking of approximately 10mm under 10kg pressure). 3. Operation monitoring: Use sensors or regularly check for deviation and noise, and make timely adjustments.
