The layered conveyor belt can adopt mechanical joints, cold bonded joints, hot vulcanized joints and other joint methods as needed. Generally, cold-bonded joints and hot-vulcanized joints adopt stepped structure joints.
The joint method of PVC and PVG whole-core flame-retardant conveyor belts, due to the special structure of the whole-core belt, the joint is not easy, so most of them use mechanical joint methods, that is, belt buckle joints. However, in order to ensure the joint effect of belts above grade 8, thermal vulcanization joints are generally used. The structure of the joints are all finger joints. The thermal vulcanization joint process of PVC and PVG whole-core flame-retardant conveyor belts is relatively complicated, and the requirements for equipment are relatively high.
The joint of the steel cord conveyor belt is the most complicated of all conveyor belt joint technologies. Not only is the process more complicated, but the joint size parameters are also the most designed. Different types of products have different joint structures.
Mentioned above are several traditional jointing methods on the market. At present, a new type of rubber conveyor belt joint method-fast seamless conveyor belt joint sleeve has appeared on the market. The fast seamless conveyor belt joint cover is a major reform of the belt joint. Compared with the traditional joint method, it has four significant advantages: fast installation, high strength, low consumption, long life and other significant advantages.
