What are the ways to change slots using PU timing belts? That is, three grooves are set on the bottom roller support. Normally, the conveyor belt roller should be stuck in the middle groove. However, when the timing belt is out of alignment and needs to be adjusted, it should stop first and carry out a series of related power outages. After the operation, use a jack to lift up the lower deflection adjustment roller, then lift it from the middle groove, and put it into the left or right groove as needed to complete the deflection adjustment. This deflection method accepts the number and spacing of the grooves Impact.
In order to solve the problem of low deflection adjustment efficiency of the belt conveyor downward roller in the current industry, this mechanism mainly includes a protruding support block at one end, a fixing part, a roller card slot, an adjusting screw and other components. The fixing part is provided with a belt frame clamping groove, and the supporting block is also arranged with a supporting roller clamping groove, and the adjusting screw passes through the convex block of the supporting block and is connected to the clamping groove with each other.
In the operation of PU timing belt conveyor, the rubber belt deviation adjustment process is safe, fast and efficient. It is very suitable for the rapid adjustment of the downward rollers of various specifications of conveyors. It has good use effect, simple and practical, high safety factor, and personnel consumption. The advantages of less and no additional fault effects are suitable for popularization and use in the working conditions of serious deviation of industrial conveyor belts, which can improve the operation efficiency of belt conveyors and avoid problems that affect the operation of conveyor belts due to shutdown and deviation adjustment.
