1. The arc tooth synchronous belt is divided into the arc tooth (HTD) and the semicircle arc tooth (STD). Therefore, when placing an order, it is necessary to distinguish the specific model and place an order.
2. The circular arc synchronous belt has thick tooth root, high tooth height and uniform fillet radius. After it is loaded, the force distribution of the belt tooth is even, which balances the stress concentration of the tooth root and improves the bearing capacity of the synchronous belt tooth.
3. Because of the characteristics of the arc tooth synchronous belt, it is better to purchase the arc tooth synchronous belt when purchasing the synchronous wheel, so as to ensure the consistency of the tooth shape.
4. For factories with high requirements on mute in the workshop, it is better to add mute cloth on the tooth surface of synchronous belt to play a more mute effect. 5. Because the tooth root of the arc tooth synchronous belt is thick, it is required that the turning radius is not easy to be too small. Polyurethane synchronous belt for aluminum profile industry.
The model of arc tooth synchronous belt is 3M, 5m, 8m, 14m, 20m, which can be built-in with steel wire or Kevlar core according to the customer's requirements. The wire core has higher strength and tensile strength, and Kevlar wire core has better winding resistance. Arc tooth synchronous belt is widely used in textile, printing and dyeing, packaging, food, steel, glass, tobacco, automobile and other industries due to its high power, stable operation, low noise and good wear resistance.
