Home >

Knowledge

15Aug 2025

How can you prevent conveyor belt slippage?

1. Check and Adjust the Tension Adjust the Tension: Ensure the conveyor belt has the correct tension. Too loose tension can cause slippage, while too tight tension can damage the belt and pulleys. Use
07Aug 2025

Print industry belt

In the paper and printing industries, various types of conveyor belts such as flat transmission belts (sheet-based belts) , perforated conveyor belts , and PVC conveyor belts are commonly used. Each t
18Jul 2025

Three Common Types of PVC Conveyor Belt Joints

There are three common methods for joining PVC conveyor belts: 1. Metal Fastener Joint This method uses metal fasteners such as alligator clips or butterfly buckles. It allows for quick and easy insta
13Aug 2025

How to maintain Rubber Timing Belt?

1. Regular inspection Appearance inspection: Regularly check the surface of the timing belt for cracks, wear, deformation or other damage. Pay special attention to whether there are cracks on the root
11Aug 2025

How to tell if a conveyor belt needs repair?

1. Appearance inspection Wear: Check the surface of the conveyor belt for obvious signs of wear, aging, deformation or damage, especially at the edges and joints. If the wear depth of the conveyor bel
08Aug 2025

At what extent does the conveyor belt need to be replaced?

1. Degree of wear Surface wear: If the wear depth of the conveyor belt surface exceeds 50% of the thickness of the cover rubber, it needs to be replaced. Exposed core: When the cover rubber of the con
06Aug 2025

How to determine whether the conveyor belt needs to be replaced?

1. Appearance inspection Wear: Check whether there are obvious signs of wear, aging, deformation or damage on the surface of the conveyor belt, especially at the edges and joints. Rubber surface wear:
04Aug 2025

How to regularly inspect and maintain the conveyor belt?

1. Daily inspection Appearance inspection: Inspect the conveyor belt surface for signs of wear, tear, deformation or damage, especially at the edges and joints. Inspect the conveyor belt for material
01Aug 2025

What to do if the Guide Bar Conveyor Belt deviates?

1. Check the installation specifications Irregular installation: The conveyor belt is not adjusted according to the standard procedure during installation, or the installation is not firm, and the fra
30Jul 2025

How to install and maintain the Guide Bar Conveyor Belt?

Installation steps 1. Preparation before installation: Make sure all parts are in the correct position, including anchor bolts, conveyor frame, etc. Clean the installation site and ensure that the pas
28Jul 2025

How to prevent PU conveyor belt deformation after punching?

1. Heat sealing treatment After punching, the edge of the hole must be heat-sealed to prevent the service life of the conveyor belt from being affected by edge damage or tearing. Untreated hole edges
25Jul 2025

Does the PU conveyor belt require special treatment after punching holes?

1. Heat sealing treatment Necessity: After punching holes, the edges of the holes must be heat-sealed to prevent the service life of the conveyor belt from being affected by edge damage or tearing. Me

First 12 13 14 15 16 17 18 Last 15/60

Knowledge

How can you prevent conveyor belt slippage?

Print industry belt

Three Common Types of PVC Conveyor Belt Joints

How to maintain Rubber Timing Belt?

How to tell if a conveyor belt needs repair?

At what extent does the conveyor belt need to be replaced?

How to determine whether the conveyor belt needs to be replaced?

How to regularly inspect and maintain the conveyor belt?

What to do if the Guide Bar Conveyor Belt deviates?

How to install and maintain the Guide Bar Conveyor Belt?

How to prevent PU conveyor belt deformation after punching?

Does the PU conveyor belt require special treatment after punching holes?